[. . . ] Unplug the TV before moving it or if you are not going to use it for several days. To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. Screw the band to the TV stand and to the provided hole at the rear of your TV. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. [. . . ] Set TV to turn on automatically according to the desired period of time. Set TV to turn off automatically according to the desired period of time. X Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the "Personal" option. The last adjusted picture setting from the "Picture Adjustment" option in the menu (see page 18). Press (or SOUND MODE on the top control panel) to select the desired sound mode with a 5-Band Graphic Equalizer display. To listen to dynamic and clear sound that emphasizes both the low and high tones. The last adjusted sound setting from the "Sound Adjustment" option in the menu (see page 20). You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. If the stereo sound is noisy when receiving a stereo program, select "Mono". Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. Each time you press , the screen changes as follows: Teletext t Teletext and TV t TV. The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of "Personal" mode in the menu. Press B or b to select the desired sound frequency, then press V or v to adjust the setting and press . The adjusted settings will be received when you select "Personal". Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. â· You may display the settings directly using the SOUND MODE button on the top control panel (see page 9) or button on the remote control (see page 11). The "Timer" menu allows you to set TV to turn off and turn on automatically. After the selected length of time, the TV hours), then press switches on automatically and "Wake Up Timer" will appear on the screen. The indicator on the TV lights up amber once you set the "Wake Up Timer". You can also cancel "Sleep Timer" and "Wake Up Timer" by turning off the TV's main power. â· If no buttons or controls are pressed for more than one hour after the TV is turned on using the "Wake Up Timer", the TV automatically goes into standby mode. The "Channel Setup" menu allows you to preset channels automatically, manually preset channels, label the program number, block unwanted programs and change the order of TV channels that appear on the screen. [. . . ] The "Setup" menu allows you to change the menu language, adjust the picture position, change the picture size, label the connected equipment, select the color system and enjoy audio equipment sound. Press V or v to select either "English" or " then press . Adjust the picture position when it is not aligned with the TV screen. Enjoy the sound of audio equipment through the TV speakers while viewing picture from other inputs. [. . . ]